Home › Guides

Plug-in Solar Is Now Legal in the UK (27 August 2026): What You Need to Know

On 27 August 2026, plug-in solar became legal to buy and use in Great Britain (England, Scotland and Wales). This guide summarises the official rules, what they do and do not cover, and the figures published by government and the Energy Saving Trust. It is not legal or electrical advice.

What changed, and where it applies

The legal change is The Plugs and Sockets etc. (Safety) Regulations 1994 and Electricity Safety, Quality and Continuity Regulations 2002 (Amendment) Regulations 2026 (SI 2026/848). The instrument was made on 16 July 2026 and came into force on 27 August 2026.

  • The definition of a "plug-in microgenerator" and the plug-approval changes (regulations 1 and 2) extend to England, Wales, Scotland and Northern Ireland.
  • The amendment that actually allows these devices to be installed and operated under the Electricity Safety, Quality and Continuity Regulations (regulation 3) extends only to England, Wales and Scotland.

That is why GOV.UK and the Energy Saving Trust both say plug-in solar is legal in Great Britain from 27 August 2026, and is not currently legal in Northern Ireland until separate regulations there are updated.

A GOV.UK news announcement published on 26 August 2026 (Department for Energy Security and Net Zero) confirmed the start date and said households could save up to £110 a year, with a kit providing up to 20% of average home electricity use. Retailers named in that announcement as working on the rollout included Amazon, Currys, B&Q, Screwfix, Argos and Wickes. Availability on any given day still depends on the retailer.

The official limits

SI 2026/848 defines a plug-in microgenerator as a source of energy that:

  • generates electricity from sunlight;
  • has a maximum rated alternating current output not exceeding 800 watts;
  • is intended for connection to a low-voltage home installation with a standard plug and socket;
  • is designed to operate in parallel with the distributor's network; and
  • is not designed to import electricity from the home in order to store it for later supply, other than for control or auxiliary functions allowed by the product specification.

Devices must comply with the Plug-in Solar Device Interim Product Specification, version 2, published by the Secretary of State on 16 July 2026 (the version named in the regulations). That specification adds, among other things:

  • maximum apparent power supplied to the mains of 800 VA, and maximum current of 3.5 A;
  • maximum total PV module DC power (Pmax) of 2,000 W;
  • manufacturers must advise buyers that a total panel rating above 960 W should prompt a professional assessment of the existing electrical installation;
  • only one plug-in solar product per household final ring circuit (and, as of the specification's publication, Engineering Recommendation G98 still restricts this to one device per household until that recommendation is amended);
  • the specification does not apply to plug-in battery systems or to plug-in solar devices with integrated batteries.

The Energy Saving Trust also says you may only have one plug-in solar device in your home (the device may include more than one panel), and that you must not join multiple devices together ("daisy chaining"). It notes that the government is looking at allowing more than one device in future.

Registration and the approved-product list

The Energy Saving Trust says you are legally required to register a plug-in solar device, and that you should use the official UK Plug-in Solar Registration website. You will need your name, postcode, and the make and model. Its checklist says you should see on-screen confirmation and will not get an email. Its main advice page says to register before use; the checklist says to register after installation. Follow the official registration site's own instructions on timing.

The Interim Product Specification also requires manufacturers to tell users that notification to the distribution network operator (DNO) of connection and disconnection is mandatory.

Before you buy, check that the exact model is on the list of devices that meet UK standards. The Energy Saving Trust points to the ENA Connect Direct LCT Device Register.

Permissions, sockets and safety

GOV.UK says that before buying or installing you should check whether any permissions are required. That may include permission from a landlord, building owner or freeholder, planning permission, or listed-building consent.

The Energy Saving Trust's buyer checklist, written with the Department for Energy Security and Net Zero, adds practical points we think are worth repeating:

  • Get permission before you buy if you rent, are a leaseholder, or live in a managed building, especially if you will drill for brackets or need a new outdoor socket.
  • England has a permitted development right intended to make installation on houses easier; in Scotland and Wales, check local requirements. Listed buildings and conservation areas need extra checks.
  • Plug the device directly into a suitable socket. Do not use an extension lead. Outdoor sockets should be weatherproof (the Trust mentions a rating of at least IP65) and installed by a qualified electrician.
  • The socket should be on a circuit that does not also serve lighting or hard-wired appliances such as a boiler or cooker.
  • If the consumer unit still uses older rewireable fuses, the Trust says not to install plug-in solar until the electrics are brought up to date.
  • Tell your buildings and contents insurer.

Devices are designed to switch off in a power cut (anti-islanding). The Energy Saving Trust is explicit: they will not power your home during a blackout.

What they cost, and what you might save

These are published estimates, not a promise for your house:

  • Energy Saving Trust: UK-compliant kits cost from around £450 (panels, microinverter, mounting and cables). An 800 W system, modelled in Manchester, south-facing at 30°, with no shade, 2,500 kWh yearly household use (Ofgem's typical figure) and 24.7p/kWh, could save about £100 a year if you are home all day, or about £70 a year if you are out during the day. The Trust's research puts yearly generation at around 700 kWh. It also notes that current UK devices are often more practical in a garden than on a flat balcony, and that a typical rooftop system costs around £7,600.
  • GOV.UK: households could save up to £110 a year, with each kit producing up to 800 W, enough, the department said, to provide up to 20% of average home electricity use.

Put your own tariff, city and kit size into the calculator. Manufacturer "up to" savings figures are usually ideal-case marketing; we treat the Energy Saving Trust numbers as the more cautious benchmark.

Can you sell surplus electricity?

Usually not. The Energy Saving Trust says most suppliers require a valid MCS certificate for the Smart Export Guarantee, which plug-in kits typically do not have. Some suppliers may offer an export tariff without MCS; ask your supplier. The value is in using the electricity yourself while the sun is out.

Batteries

SI 2026/848's definition excludes devices designed to import electricity from the home in order to store it for later use (except permitted control or auxiliary functions). The Interim Product Specification says it does not apply to plug-in battery systems or to plug-in solar with integrated batteries. The Energy Saving Trust's FAQ is direct: "Not right now. Under the current regulations, plug-in solar panels with integrated battery storage aren't covered." See also Do you need a battery?.

A UK-compliant kit example

On 16 November 2026, Currys listed the InstaGen ONE two-panel kit at £599: two 435 W bifacial panels (870 W of panels, inverter clipped to 800 W), an 800 VA microinverter, ground-mount frames, Wi-Fi and Bluetooth. Currys says it is not available in Northern Ireland, should be connected to a suitable outdoor socket installed and certified by a qualified electrician, and that you must register the device at myplugin.solar before use. More kits and EU brands are on our kit comparison.

Sources

  1. SI 2026/848 (legislation.gov.uk), including the 27 August 2026 commencement date, the 800 W AC definition, the battery-import exclusion, and the territorial extent of regulation 3.
  2. Plug-in Solar Device Interim Product Specification, version 2.0, July 2026 (DESNZ): 800 VA / 3.5 A, 2,000 W module cap, 960 W professional-assessment advice, one device, exclusion of integrated batteries, mandatory DNO notification.
  3. GOV.UK, "Households can save as plug-in solar panels come to market", 26 August 2026, Department for Energy Security and Net Zero.
  4. Energy Saving Trust, "Plug-in solar panels" (legal status, savings methodology, one-device rule, registration, export, batteries, cost from £450).
  5. Energy Saving Trust, "Plug-in solar panels: Checks to make before you buy" (permissions, sockets, ENA register, registration details).
  6. Currys product page for the InstaGen ONE two-panel kit, checked 16 November 2026 (link above).

Next: Germany's balcony solar rules · Compare kits.

AD SLOT · Display ad – 728×90 / responsive (AdSense / Ezoic / Mediavine)

Run the calculator →

Last updated 2026-11-16. Estimates only; not electrical or financial advice.